Photocentric3D LC 10"


I’ve running this software in combination with the photocentric daylight printer and it works great!

For this software I’ve made an seperate software branch which can be found on my Github. When I’m satisfied with the result I will post the image file here!

In this stripped version everything is preconfigured, pulls only the photocentric profiles from github and all unneeded functions are deleted which make the software even more user friendly!

One sweet feature for this printer is that when you remove the hood the printer automatically pauses so you can refill resin if needed!


Can you write a link for software branch? Thanks.


Hi @renzaa ,

Thanks for your intrest in this software branch! But currently I’m very busy with my graduation along with the fact photonic3d had some slicing issues (which is being worked on ofcourse!). So because of this this software branch isn’t stable and ready for now. I think I’ll have this up and running within a month ;)! I’ll remention you here when done!

Thanks for understanding.



Hi @renzaa

a stripped out software version for photocentric can be found here :

I still need to convert all photocentrics profile and I might start working on a complete GUI change. Currently this GUI is just a stripped down one from the original software + only photocentric profiles.

One problem that remains for the LC 10" is that the screen resolution is wrongly recognized so you will have to set it from config.txt, let me know if you need help!


Here is my first print with this printer. Literally plug and play with the latest dev version. I even put the home gcode in the header for a push button print. For this I just did a regular photo print with edge detection turned off since they were already black and white. I did notice that both of the ghosts detached prematurely from the base and one of them slid enough to cause a misprint. Other than the detach, the printer was a dream!


This is my second print. This was printed direct from an SVG file exported from a gear builder. It also started to break free from the platform, but it finished in time to turn out pretty well.


Hi Wes!

Cool to see your prints in here! Things I would advice to improve your succes rate are :

  • I implemented the slower speeds on bigger build area slices. This values aren’t tested very well so it might need to be set to even slower on this bigger area’s
  • I normally use the rule that my build base plate (so the first layers off my print) should be bigger than any other slices build area, this works fine for me but for such parts that’s more difficult.
  • Rehome it manually before printing so you sure the buildplatform is 100% paralell to the screen
  • Make sure your build platform is 100% clean
  • You can lightly sand paper your buildplatform to improve adhesion, this will also make it harder to remove the parts.

Hope one of the tips help :)!


Also if I look at the gear picture it seems as the foil wasn’t 100% flat. I would check this too because it will improve print quality ;)! (you see bit of a wringle in the part)


Your right it wasn’t flat, but the problem is because I dented the foil on the bottom of the vat and caused a bit of a ripple.


@Robin - has there been some improvements on this project? :slight_smile: I haven’t tried it out yet, but I’ll do so in the coming days :slight_smile:


What would you like improved? If it’s a small feature, we can throw it in.


@Friborg Currently the normal Photonic3D works totally fine with an LC 10" and it prints stable due to the great help of @WesGilster . Alongside this, Photocentric is working on a variation of Photonic3D which can turn your LC10 in a more standalone printer.

This software will work on a raspberry pi with touchscreen. From the touchscreen you can control the printer, move it up and down etc. Furthermore the software has been simplified for use on Photocentrics printers.

Currently the software is being tested in house, the github fork can be found here :

Currently even the stable repo has some issues, these should be resolved soon. When we feel confident to release this we will also offer very cheap complete kits for the LC10 to convert it into an standalone printer. These should/would be even cheaper than sourcing your own parts. So keep an eye on the website!

Ofcourse the software itself will remain free and opensource just like Photonic3D. And everyone who would like to is more than welcome to help contribute on the stable Photonic3D fork or on the specific Photocentric fork. Just create a pull request :)!


@WesGilster Would it be possible to share your LC10 settings here - i´ve tried for some days now, but I can´t get my LC10 running with Photonic3D… I´ve selected your "LC10.js file, but the Display is just 0:0,0 and I still can´t figure out what to set up at “Serial Port”. Automatic recognition is obviously not working.

BR, Ralf


these are all the settings set for the LC10 to make it work properly :

You don’t need to fill all the options. you should just select the display (0.0) and set the gcode to recognize 3dprinter firmware automatically. The other fields need no input.

Let me know if that helped!


Many thanks, @Robin. Maybe a newbie question, but how to import this js. file ? There is already a LC10 Jason file in the Image, but this seems not working, since the printer isn´t recognized…


When you first started up Photonic3D from scratch, it should have said something to the effect of “Don’t have a printer installed? Try one of these:” and one of the options was the LC10. Did this not work?


Unfortunately it´s not fully working. When I switch on the power on LC10 and then refresh the browser with the interface I get the the “Printer List” and “Photocentric LC10” is there, but the interface shows me the “moving circle” indicating that I have to wait… There is the possibility to “start” the printer with the button, but if you try to use the controls, you will get an overlay, that the display couldn´t been recognized.

The LC10 works with Win 64 CWH Software, so we can asume that the printer is OK.

It has to be something with Printer configuration, but unfortunately the interface do not provide much possibilities to choose Setting manually. However, I´m not sure if every setting would be right then.

I´m not a Linux guy at all, would need very basic instructions…

Help is really appreciated now.


You’ll need to take a backup of your system with “Download” button located at the bottom of any window that you are on. In the dev version, there is a button pointing down:

I’ll take a look.


Thank you, @WesGilster

Looking forward to get this working! (32.0 KB)


I should have known immediately on your first comment what the problem is without your logs, I just wasn’t careful reading. After choosing to install the Photocentic LC10, you should have just stopped right there and not touched anything.

When you fiddled with the serial port settings you chose an option to communicate with a projector over the serial port. You don’t have a projector so you can’t communicate to that projector over serial.

For your display you should have left it with “:0.0”(that’s the name of the linux screen). “Last Available Display” would have worked fine as well.

I’m assuming you were looking for the Raspberry Pi displays which are not available because the image you started from doesn’t have the Dispmanx drivers installed.